RGB High Speed Power Amplifier 3 Channels

RGB Amplifiers are typically useful in situations where length of the LED appliance (LED Strip or LED Bar) is longer than recommended for single piece or where it’s being split on multiple pieces span across large room.

It other words if you need LED strip 10, 20 meters or even longer, you need an amplifier. RGB Amplifiers never come along; they always pair with RGB Controller and perform as slave in this pair.  

•  Work temperature: -20-60 degree
•  Supply voltage: DC12-24V
•  Size: 147*70*40mm            
•  Output: 3 channel (R/G/B/+)
•  Connecting mode: common anode
•  Static power: : <1W   
•  Output current : < 8A(each channel)   
•  Output power: 12V< 288W,  24V<576W
•  Input / output optical isolation, not common ground

Safety Information:

1. Supply voltage of this product is 5~24 Volts DC, do not exceed

2. Shorting output wires my cause damage to amplifier

3. Always observe proper polarity when connecting power and load

4. For indoor use only – this product is not waterproof or weatherproof