Non Soldering Single Color Back to Back LED Strip Connector Non-Waterproof
(No reviews yet)
Write a Review
- SKU:
- VL-SE-N10XB-2b2b
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
Non-Soldering Back to Back Strip Connector (IP20)
Suitable for Non-Waterproof LED and match any 8 and 10mm LED Strips.
Width: 12mm, thickness: 6mm
Installation:
1. Cut along the light strip tape
wherever a dashed line divides
two sets of positive and negative
connection points.
2.Peel away a portion of the light
strip adhesive backing at one end.
Slide the strip end all the way into
the solder less clamp.
3.Remove the remaining adhesive
backing and attach the light strip
to the desired surface.
Related Products
Related Products
Non Soldering Single Color Back to Back LED Strip Connector Water-Resistant
$1.50
Non-Soldering Water-resistant Strip (IP65) Back to back connector to Wire.
Suitable for LED Water-Resistant and match any 8 and 10m
Non Soldering COB Strip Back to Back Connector
$1.80 - $2.20
Non-Soldering Back to Back LED Strip Connector Connector
Suitable for Non-Waterproof COB Strips or high density 180Leds/m / 240Leds/m .
Width: 10 mm / 8mm
High: 4.5mm /4...
Non Soldering RGB LED Strip to Wire Connector Non-Waterproof
$1.50
Non-Soldering Non Waterproof Strip connector to Wire. RGB
Suitable for LED Non -Waterproof and match any 10mm LED Strips.
Width:
Out of stock
Non Soldering LED Strip Connector 10mm
$3.20
Non-Soldering Back to Back LED Strip Connector Connector
Suitable for Non-Waterproof 14.4W strip and match most 10mm LED Strips.
Width:
Non Soldering LED Strip Connector with wire
$3.20 - $3.90
Non-Soldering connector for RGB and Single Color LED strip with 15 cm wire
Suitable for LED Profiles and match any 8 and 10mm LED Strips.