SMD 335 120pcs/m Non-Waterproof Side-Emitting 9.6W/m 12V

The price is per 1 meter of LED strip. 1 quantity = 1 meter. Up to 30 meters available in a single reel.

SMD 335 Side-Emitting LED Strip (12 V – 9.6 W per m, 120 LEDs/m, IP20) — side-emitting output for discreet edge glow and grazing effects in joinery, signage, shelves, and architectural accents.

Key Features

• Side-emitting design for edge and cove highlights
• Indoor use: IP20 (non-waterproof)
• Cuttable every 25 mm for precise lengths
• 12 V DC low voltage
• High colour rendering (CRI 90+)
• Easy installation with adhesive tape on the back of the LED

Available Colours

• Warm White 3000 K
• Cool White 6000 K

Specifications

• LED Model: SMD 335 (side-emitting, 120 LEDs/m)
• Wattage: 9.6 W/m
• Voltage: DC 12 V
• Cutting Interval: 25 mm
• IP Rating: IP20 (non-waterproof)
• Max single-end run: 7 m
• CRI: 90+
• Viewing Angle: 180°
• Lifespan: > 50 000 hours
• Operating Temperature: −20 °C to +50 °C
• Adhesive: adhesive tape on the back of the LED
• Warranty: 1 year

12 V Version (9.6 W per m)

• Cuttable every 25 mm
• Input Voltage: DC 12 V
• Max single-end run: 7 m

Powering Longer Runs

For runs beyond the single-end limit (7 m @ 12 V), power from both ends to maintain even brightness. Example: a 12 V installation can achieve up to ~17 m total with consistent light when powered from both ends (7 m + 7 m + ~3 m centre overlap).

• Use adequately sized cable to minimise voltage drop and ensure consistent light output.
• For complex layouts or multiple segments, use parallel feeds and keep return paths short.

Selecting the Right LED Driver

Use our Power Supply Calculator below to automatically find the correct driver for your strip length and wattage — no manual calculations needed.

Need Help or a Custom Setup?

We can solder custom wires directly to your LED strips, prepare pre-cut lengths to your measurements, and supply the correct power supply — fully tested and ready to install. We also offer complete ready-to-install kits that include LED strip + aluminium channel + controller + power supply, with the strip already professionally installed into the channel. Our team can handle all calculations and assembly for you — simply call us or get in touch online for quick assistance.