COB Dotless LED Strip (12/24V - 10/14.4/17W) Non-Waterproof

The price is per 1 meter of LED strip. 1 quantity = 1 meter. Up to 30 meters available in a single reel.

COB Dotless LED Strip (12 V / 24 V – 10 / 14.4 / 17 W per m) — high-density COB design for continuous, dot-free light output. Ideal for under-cabinet, joinery, signage, display, and architectural lighting where smooth, uniform illumination is required.

Key Features

• Seamless, dot-free COB illumination
• High colour rendering (CRI 90+)
• Available in 12 V and 24 V versions
• Flexible PCB with 3M adhesive backing
• Multiple wattage options for brightness control

Available Colours

• Warm White 3000 K
• Natural White 4000 K
• Cool White 6000 K

Specifications

• LED Model: COB Chip-on-Board
• CRI: 90+
• Lifespan: > 50 000 hours
• Operating Temperature: −20 °C to +50 °C
• IP Rating: IP20 (non-waterproof)
• Viewing Angle: 180°

12 V Versions (10 / 14.4 / 17 W per m)

• Width: 8 mm × Height: 2 mm
• Cuttable every 8 mm
• Input Voltage: DC 12 V
• Max single-end run: 5 m

24 V Versions (10 / 14.4 / 17 W per m)

• Width: 10 mm × Height: 2 mm
• Cuttable every 50 mm (5 cm)
• Input Voltage: DC 24 V
• Max single-end run: 10 m

Powering Longer Runs

• For runs longer than 5 m (12 V) or 10 m (24 V), power from both ends to maintain even brightness.
• When powered from both ends, the 24 V version can reach approximately 10 m + 10 m + ≈ 3 m extra — giving up to ≈ 23 m total with consistent light.
• Use adequately sized cable to minimise voltage drop and ensure consistent light output.

Selecting the Right LED Driver

Use our Power Supply Calculator below to automatically find the correct driver for your strip length and wattage — no manual calculations needed.

Need Help or a Custom Setup?

We can solder custom wires directly to your LED strips, prepare pre-cut lengths to your measurements, and supply the correct power supply — fully tested and ready to install. We also offer complete ready-to-install kits that include LED strip + aluminium channel + controller + power supply, with the strip already professionally installed into the channel. Our team can handle all calculations and assembly for you — simply call us or get in touch online for quick assistance.