Dotless RGB LED Strip (24V,15W) COB Waterproof IP67

The price is per 1 meter of LED strip. 1 quantity = 1 meter. Up to 30 meters available in a single reel.

COB Dotless RGB LED Strip (24 V – 15 W per m, IP67) — waterproof, continuous dot-free RGB illumination for joinery, architectural accents, outdoor coves, signage, and displays.

Key Features

• RGB (multicolour) — requires RGB controller
• Dotless COB technology for uniform light
• Cuttable every 5 cm
• adhesive tape on the back of the LED
• Available in 24 V
• High colour rendering (CRI 90+)

Available Colours

• RGB — Red / Green / Blue (full colour mixing via controller)

Specifications

• LED Model: COB RGB (Chip-on-Board)
• Power Consumption: 15 W/m
• Input Voltage: DC 24 V
• CRI: 90+
• Viewing Angle: 180°
• Lifespan: > 50 000 hours
• Operating Temperature: −20 °C to +50 °C
• IP Rating: IP67 (waterproof)
• Mounting: adhesive tape on the back of the LED
• Warranty: 1 year

24 V Version (15 W per m)

• Cuttable every 5 cm
• Input Voltage: DC 24 V
• Max single-end run: 3 m

Powering Longer Runs

• For runs beyond the single-end limit (3 m @ 24 V), power from both ends to maintain even brightness. Example: a 24 V installation can achieve up to ~9 m total with consistent light when powered from both ends (3 m + 3 m + ~3 m centre overlap).

Selecting the Right LED Driver

Use our Power Supply Calculator below to automatically find the correct driver for your strip length and wattage — no manual calculations needed.

Need Help or a Custom Setup?

We can solder custom wires directly to your LED strips, prepare pre-cut lengths to your measurements, and supply the correct power supply — fully tested and ready to install. We also offer complete ready-to-install kits that include LED strip + aluminium channel + controller + power supply, with the strip already professionally installed into the channel. Our team can handle all calculations and assembly for you — simply call us or get in touch online for quick assistance.