SMD 2835 30 pcs/m Non-Waterproof 2.4W/m 12V

The price is per 1 meter of LED strip. 1 quantity = 1 meter. Up to 30 meters available in a single reel.

SMD 2835 LED Strip (12 V – 2.4 W per m, 30 LEDs/m) — efficient, low-power strip for clean accent and ambient illumination in under-cabinet, joinery, displays, and architectural details.

Key Features

• 30 LEDs per meter
• Cut points: every 3 LEDs (≈ 10 cm)
• adhesive tape on the back of the LED
• Available in 12 V
• High colour rendering (CRI 90+)

Available Colours

• Warm White 3000 K
• Natural White 4000 K
• Cool White 6000 K

Specifications

• LED Model: SMD 2835
• LEDs per Meter: 30 pcs
• Power Consumption: 2.4 W/m
• Input Voltage: DC 12 V
• Recommended Current: ≈ 0.20 A/m
• CRI: 90+
• Viewing Angle: 180°
• Lifespan: > 50 000 hours
• Operating Temperature: −20 °C to +50 °C
• IP Rating: IP20 (non-waterproof)
• Mounting: adhesive tape on the back of the LED
• Warranty: 1 year

12 V Version (2.4 W per m)

• Cuttable every 3 LEDs (≈ 10 cm)
• Input Voltage: DC 12 V
• Max single-end run: 7 m

Powering Longer Runs

• For runs beyond the single-end limit (7 m @ 12 V, 14 m @ 24 V), power from both ends to maintain even brightness. Example: a 24 V installation can achieve up to ~31 m total with consistent light when powered from both ends (14 m + 14 m + ~3 m center overlap).

Selecting the Right LED Driver

Use our Power Supply Calculator below to automatically find the correct driver for your strip length and wattage — no manual calculations needed.

Need Help or a Custom Setup?

We can solder custom wires directly to your LED strips, prepare pre-cut lengths to your measurements, and supply the correct power supply — fully tested and ready to install. We also offer complete ready-to-install kits that include LED strip + aluminium channel + controller + power supply, with the strip already professionally installed into the channel. Our team can handle all calculations and assembly for you — simply call us or get in touch online for quick assistance.