IP65 SMD 2835 240 pcs/m in Water Resistant Tube (12/24V - 19.2W/m)

Price is per 1 metre. 1 qty = 1 metre. If you require more than 1 metre, just select the appropriate amount at checkout.

SMD 2835 White LED Strip (12 V / 24 V – 19.2 W/m, IP65) is a high-density 240 LED/m single-colour strip delivering bright, even white light for indoor and outdoor decorative lighting. Its ultra-high LED count gives a smooth, dot-free line of light — ideal for cove and channel lighting, under-cabinet, feature and accent installations.

Voltage & colour options

• 24 V version: 19.2 W/m — available in Cool White 6500 K, Natural White 4000 K and Warm White 3000 K
• 12 V version: 19.2 W/m — available in Cool White 6500 K and Warm White 3000 K (Natural White is not available in 12 V)

Applications

Indoor and outdoor decorative lighting — car, garage, backyard, decking, living areas, kitchen, walk-in robe and stairway lighting. Also ideal for appliance contour marking and channel lighting.

Dimming

This is a constant-voltage single-colour strip. For brightness control, use a compatible single-colour LED dimmer that matches your strip's voltage (12 V or 24 V). For on/off operation, connect it to a suitable constant-voltage power supply of the same voltage.

Specifications

• LED modelSMD 2835
• LED density240 LEDs/m
• VoltageDC 12 V or DC 24 V
• Power19.2 W/m
• Colour temps6500 K / 4000 K* / 3000 K
• Forward current~0.75 A/m (at 24 V)
• Cut lengthEvery 6 LEDs (25 mm)
• DimensionsW 10 mm × H 1.7 mm
• PCB thickness0.25 mm
• Recommended max single-end run24 V: 5 m · 12 V: 2.5 m
• IP ratingIP65
• Operating temp−20 °C to +50 °C
• Adhesive3M double-sided tape
• LifespanMTBF > 50,000 hours

*Natural White 4000 K available in the 24 V version only.

Wiring

2-pin single-colour strip: Red = V+ (positive) · Black = V− (negative). Observe correct polarity when connecting.

Powering longer runs

• 24 V: For lengths beyond ~5 m, power the strip from both ends to maintain brightness and colour consistency.
• 12 V: For lengths beyond ~2.5 m, power the strip from both ends. (At 12 V the strip draws double the current of 24 V, so voltage drop is greater — keep runs shorter or inject power more often.)

Selecting the right power supply

Use our calculator to select the correct driver for your strip length and wattage (19.2 W/m).

Not sure what you need?

If you're unsure which colour temperature, dimmer or power supply is right for your project, our team is here to help. We'll take the time to understand your application and make sure you get exactly what you need — no guesswork. We can recommend the correct products, prepare pre-cut lengths, solder custom wires, or supply a complete ready-to-install kit with aluminium profile and accessories.