RGB+CCT Dotless LED Strip 24V 19.2W/m 840 LEDs/m IP20 (Colour + Tunable White)

Price is per 1 metre. 1 qty = 1 metre. Supplied on a single continuous reel.

Dotless FCOB RGB+CCT LED Strip (24 V – 19.2 W/m, 840 LEDs/m, IP20) combines full RGB colour and tunable white (warm to cool) in a single five-channel strip, with a smooth, continuous dot-free light line. One run handles everyday white task and ambient lighting and switches to full colour for mood and effect, so there is no need to install two separate strips. Ideal for living spaces, kitchens, ceilings, cove and feature lighting, retail and hospitality where you want both quality white light and colour from the same install.

Voltage / power

• 24 V version: 19.2 W/m (0.8 A/m), cuttable at marked cut points, recommended max single-end run approx. 5 m [CONFIRM]

Controller / dimming

This is a five-channel RGB+CCT 24 V strip and requires a matching 5-channel RGB+CCT controller. It pairs directly with our Wi-Fi Universal Controller (app and RF remote control of colour, white temperature and brightness). Select the RGB+CW+WW remote option to suit this strip. A standard RGB or single-colour controller will not drive the white channels correctly.

Wiring

The strip uses a six-conductor connection: +24 V, R, G, B, Warm White (W) and Cool White (C). Match each conductor to the matching output on the controller.

Specifications

• LED modelFCOB RGB+CCT (dotless, 5-in-1)
• ChannelsR / G / B / Warm White / Cool White
• LED density840 LEDs/m
• VoltageDC 24 V
• Power19.2 W/m
• Current0.8 A/m
• White rangeWarm to cool (tunable) [CONFIRM K]
• Cut length[CONFIRM]
• Recommended max single-end runapprox. 5 m [CONFIRM]
• Beam angle180°
• IP ratingIP20 (non-waterproof)
• Operating temp−20 °C to +50 °C
• Adhesive3M 9080A tape on the back of the strip
• Warranty1 year

Powering longer runs

• 24 V: for lengths beyond the recommended single-end run, power the strip from both ends to maintain brightness and colour consistency along the run.

Selecting the right power supply

Use our calculator to select the correct 24 V driver for your strip length and wattage. At 19.2 W/m, allow roughly 96 W for a 5 m run, plus headroom.

Not sure what you need?

If you are unsure which controller or power supply suits your project, our team is here to help. We will take the time to understand your application and make sure you get exactly what you need, no guesswork. We can recommend the correct products, prepare pre-cut lengths, solder custom wires, or supply a complete ready-to-install kit with aluminium profile and accessories.